A biodiversity evaluation framework for restoration of aquatic macrophyte communities in shallow lakes driven by hydrological process management     

Shuhan Li  Tao Sun  Wei Yang  Baoshan Cui  Xinan Yin 《水文研究》2021,35(1):e13983

Macrophyte community diversity and composition respond to ecosystem conservation and local environmental factors. In this study, we developed a multidimensional diversity framework for macrophyte communities, including the taxonomic and functional alpha and beta diversity. We used the framework to explore the relationships among water level regimes and these diversity parameters in a case study of China's Baiyangdian Lake. Analysis of indicators of hydrologic alteration divided the water level from 1959 to 2019 into four regimes (dry, <6.42 m; low, 6.42–7.23 m; medium, 7.23–8.19 m; high, >8.19 m). Alpha and beta diversity were significantly higher in the medium regime than in the low and high regimes. Redundancy analysis indicated that the maximum water depth significantly affected taxonomic alpha diversity, and total nitrogen (TN) and chemical oxygen demand (COD) concentration significantly affected functional alpha diversity, respectively. Mantel tests showed that TN, Secchi depth (SD), and water depth in the high water level regime significantly increased the total beta diversity and turnover components. TN was the main factor that increased total taxonomic beta diversity. Water level regime mainly influenced interspecific relationships by changing the TN and COD concentration. The water level should be maintained between the medium and high water level regimes to promote restoration of the macrophyte community and improve ecosystem stability. The biodiversity evaluation framework would provide a deeper insight into the hydrological process management for restoration of aquatic macrophyte communities in shallow lakes.  相似文献   

An experimental investigation of the effects of thawed soil depth on rill flow velocity     

Xiaofeng Gao  Xiaonan Shi  Tingwu Lei  Huaqing Liu  Jiahui Yang 《水文研究》2021,35(2):e14043

Water flow velocity is an important hydraulic variable in hydrological and soil erosion models, and is greatly affected by freezing and thawing of the surface soil layer in cold high-altitude regions. The accurate measurement of rill flow velocity when impacted by the thawing process is critical to simulate runoff and sediment transport processes. In this study, an electrolyte tracer modelling method was used to measure rill flow velocity along a meadow soil slope at different thaw depths under simulated rainfall. Rill flow velocity was measured using four thawed soil depths (0, 1, 2 and 10 cm), four slope gradients (5°, 10°, 15° and 20°) and four rainfall intensities (30, 60, 90 and 120 mm·h⁻¹). The results showed that the increase in thawed soil depth caused a decrease in rill flow velocity, whereby the rate of this decrease was also diminishing. Whilst the rill flow velocity was positively correlated with slope gradient and rainfall intensity, the response of rill flow velocity to these influencing factors varied with thawed soil depth. The mechanism by which thawed soil depth influenced rill flow velocity was attributed to the consumption of runoff energy, slope surface roughness, and the headcut effect. Rill flow velocity was modelled by thawed soil depth, slope gradient and rainfall intensity using an empirical function. This function predicted values that were in good agreement with the measured data. These results provide the foundation for a better understanding of the effect of thawed soil depth on slope hydrology, erosion and the parameterization scheme for hydrological and soil erosion models.  相似文献   

How soil texture,channel shape and cross-sectional area affect moisture dynamics and water loss in irrigation channels     

Zhifan Mu  Tianxiao Li  Dong Liu  Qiang Fu  Renjie Hou  Qinglin Li  Yi Ji  Song Cui  Mo Li 《水文研究》2021,35(4):e14155

To enhance the utilization efficiency of farmland irrigation water and reduce the leakage of water conveyance channels, the leakage process of channels was simulated dynamically. The simulated results were compared with data measured in laboratory experiments, and the performance of the model was evaluated. The results indicated that the simulated values of the model were consistent with the observation values, and the R² values varied between 0.91 and 0.99. In addition, based on the laboratory experiments, a water supply system (Mariotte bottles) and soil box were built using plexiglass. Three influencing factors, namely, the channel form, soil texture and channel cross-sectional area, were varied to observe and calculate the resulting cumulative infiltration amount, infiltration rate and wetting front migration distance. HYDRUS-3D software was used to solve the three-dimensional soil water movement equation under different initial conditions. The results demonstrated that the U-shaped channel was more effective than the trapezoidal channel in increasing the utilization efficiency of the water resources. A U-shaped channel with a small channel cross-sectional area should be adopted and the soil particle size should be prioritized in the construction of water conveyance channels for farmlands. The simulation results were in agreement with the observed results, which indicates that HYDRUS-3D is a reliable tool that can accurately simulate the soil moisture movement in water conveyance channels. The research results can provide a reference for the design and operation of farmland irrigation systems.  相似文献   

Trends and risk evolution of drought disasters in Tibet Region,China     

Chen  Qiong  Liu  Fenggui  Chen  Ruijie  Zhao  Zhilong  Zhang  Yili  Cui  Peng  Zheng  Du 《地理学报(英文版)》2019,29(11):1859-1875

Journal of Geographical Sciences - The risk posed by natural disasters can be largely reflected by hazard and vulnerability. The analysis of long-term hazard series can reveal the mechanisms by...  相似文献   

四川盆地广安地区中二叠统栖霞组岩石特征与沉积环境     

易海永  崔宝琛  王瑶琳  邱玉超  徐胜林  李乾 《吉林大学学报(地球科学版)》2020,50(2):454-464

四川盆地中二叠统栖霞组勘探发现系列油气，资源潜力巨大。但广安地区中二叠统栖霞组的岩石学特征及沉积环境研究薄弱。在野外地质调查的基础上，结合室内岩石学、岩相学等综合分析，对广安地区栖霞组碳酸盐岩岩石特征、沉积相类型及其古地理展布特征进行了系统研究。结果表明：广安地区栖霞组主要发育亮晶颗粒灰岩、亮晶生物碎屑灰岩、微晶生物碎屑灰岩、微晶颗粒灰岩、生物碎屑微晶灰岩、含生物碎屑微晶灰岩和泥晶灰岩7种岩石类型；碳酸盐岩颗粒主要以生物碎屑为主，部分层位发育球粒；古生物化石以三叶虫、腕足和有孔虫为主，同时可见棘皮类和藻类；栖霞组沉积期主要为碳酸盐岩台地沉积环境，其中栖霞组晚期（栖二段）台缘滩和台内滩较为发育，为该区油气成藏提供了有利条件。  相似文献   

四川地区震后应急会商资料快速产出系统的设计与实现     

祁玉萍  汪小厉  林圣杰  肖本夫  何畅  廖晓峰 《震灾防御技术》2020,15(1):176-183

地震预报意见以大量资料为基础，依靠专家经验和多学科知识并通过会商讨论形成。显著地震发生后，快速、准确、有效地研判震情可为后期应急指挥和地震现场工作奠定基础。本文以Datist软件为平台，基于四川及邻区的基础资料，设计研发符合四川震情的震后会商资料快速产出系统，当四川及邻区发生中强地震时，通过该系统可在收到地震短信5分钟内以请求触发的方式快速产出应急会商资料，并以微信、PowerPoint和Word的形式将基础资料发送给分析预报人员，为后期趋势分析奠定基础。  相似文献   

Cyclical one-way continental rupture-drift in the Tethyan evolution: Subduction-driven plate tectonics     

Wan  Bo  Wu  Fuyuan  Chen  Ling  Zhao  Liang  Liang  Xiaofeng  Xiao  Wenjiao  Zhu  Rixiang 《中国科学:地球科学(英文版)》2019,62(12):2005-2016

Numerous continents have rifted and drifted away from Gondwana to repeatedly open ocean basins over the past-500 millionyears.These Gondwana-derived continents drifted towards and collided with components of the Eurasian continent to successively close the preexisting oceans between the two.Plate tectonics satisfactorily describes the continental drift from Gondwana to Eurasia but does not define the geodynamic mechanism of continuously rifting to collisions of continents in the Tethy an Realm.After reappraisal of geological records of the rift,collision and subduction initiation from the surface and various geophysical observations from depth,we propose that Eurasia-directed subducting oceanic slabs would have driven Tethyan system in the Phanerozoic.The Eurasia-directed subduction would have dragged the passive Gondwana margin to rift and drift northwards,giving birth to new oceans since the Paleozoic.The closure of preexisting oceans between the Gondwana-derived continents and Eurasia led to continental collisions,which would have induced the initiation of oceanic subduction in the Tethyan Realm.Multiple episodic switches between collision-subduction-rift repeatedly led to the separation of continental fragments from Gondwana and dragged them to drift towards Eurasia.The final disappearance of Neo-Tethy s would have induced collision of the Gondwana-derived continents with the Eurasian continent,giving rise to the Cenozoic Alpine-Zagros-Himalayan collisional system.Therefore,the Eurasia-directed oceanic subduction would have acted as a 'one-way train' that successively transferred the ruptured Gondwana continental fragments in the south,into the terminal in the north.In this regard,the engine of this "Tethyan one-way train" is the negative buoyancy of subducting oceanic slabs.  相似文献   

不同结构林带防风效能风洞模拟     

李晓烨  王克俭  谷建才  刘启国  崔严 《中国沙漠》2019,39(6):118-125

防风林带结构是影响防风效能的主要因素。建立不同宽度、不同株行距林带防风效能与林带后距离之间的统计模型，可以为防风林建设提供指导性意见。通过风洞实验，在11 m·s^-1风速下，对4种宽度、5种株行距林带的背风面0~10H（H为林带高度）的风速进行测定，采用曲线参数估计法、傅立叶模型、SSF模型（Sum of Sin Functions），构建了不同结构林带防风效能与林带后距离间的统计模型。结果表明：傅立叶模型拟合不同宽度林带的防风效能与林带后距离的关系效果最优，可决系数（R²）均在98%以上；SSF模型拟合不同株行距林带的防风效能与林带后距离的关系效果最优（R²>0.98）。根据构建的统计模型，风速为11 m·s^-1左右时，林带宽度8 m（两行一带）的防风林的防风效能存在明显优势；5种株行距的林带中，株行距为8 m×8 m的防风林带本试验条件下防风效果最好。  相似文献   

2018年云南通海MS5.0和墨江MS5.9地震前地磁垂直强度极化异常时空特征研究     

樊文杰  姚休义  廖晓峰 《中国地震》2020,36(2):276-283

利用云南11个地磁台站的秒采样观测数据，计算和分析了地磁垂直强度极化值Y_zh在2019年8月13日、14日通海M_S5.0地震前及2019年9月8日墨江M_S5.9地震前的时空变化特征。研究表明，地磁台站Y_zh值的幅度在震前会出现同步增强现象。而与以往的极化震例研究相比，Y_zh值的高值异常在震前出现时间要更早些，可能会在震前2~5个月出现，距发震时间越近，产生的异常幅值可能越大，异常持续时间也越长。同时，研究还发现2次地震主要发生在异常空间等值线的高值区内，尤其在零值阈值线附近，这可能对今后发震地点的预测有一定的指示意义。对比异常产生时段内的D_st指数，认为该高值异常并非由空间电流体系所引起。  相似文献   

Quantifying flow resistance in mountain streams using computational fluid dynamics modeling over structure-from-motion photogrammetry-derived microtopography     

Yunxiang Chen  Roman A. DiBiase  Nicholas McCarroll  Xiaofeng Liu 《地球表面变化过程与地形》2019,44(10):1973-1987

Flow resistance in mountain streams is important for assessing flooding hazard and quantifying sediment transport and bedrock incision in upland landscapes. In such settings, flow resistance is sensitive to grain-scale roughness, which has traditionally been characterized by particle size distributions derived from laborious point counts of streambed sediment. Developing a general framework for rapid quantification of resistance in mountain streams is still a challenge. Here we present a semi-automated workflow that combines millimeter- to centimeter-scale structure-from-motion (SfM) photogrammetry surveys of bed topography and computational fluid dynamics (CFD) simulations to better evaluate surface roughness and rapidly quantify flow resistance in mountain streams. The workflow was applied to three field sites of gravel, cobble, and boulder-bedded channels with a wide range of grain size, sorting, and shape. Large-eddy simulations with body-fitted meshes generated from SfM photogrammetry-derived surfaces were performed to quantify flow resistance. The analysis of bed microtopography using a second-order structure function identified three scaling regimes that corresponded to important roughness length scales and surface complexity contributing to flow resistance. The standard deviation σ_z of detrended streambed elevation normalized by water depth, as a proxy for the vertical roughness length scale, emerges as the primary control on flow resistance and is furthermore tied to the characteristic length scale of rough surface-generated vortices. Horizontal length scales and surface complexity are secondary controls on flow resistance. A new resistance predictor linking water depth and vertical roughness scale, i.e.  H/σ_z, is proposed based on the comparison between σ_z and the characteristic length scale of vortex shedding. In addition, representing streambeds using digital elevation models (DEM) is appropriate for well-sorted streambeds, but not for poorly sorted ones under shallow and medium flow depth conditions due to the missing local overhanging features captured by fully 3D meshes which modulate local pressure gradient and thus bulk flow separation and pressure distribution. An appraisal of the mesh resolution effect on flow resistance shows that the SfM photogrammetry data resolution and the optimal CFD mesh size should be about 1/7 to 1/14 of the standard deviation of bed elevation. © 2019 John Wiley & Sons, Ltd.  相似文献